BBC LS5/9

PVP: 4.730 €

Altavoces de Soporte Grahan Audio BBC LS5/9

2018-02-22_18h01_04

Specifications

System 2 Way, reflex loading
Enclosure Thin wall construction, birch plywood
Finish Real wood veneer
Dimensions (w/h/d) 28cm by 46cm by 27.5cm
Weight 14kg
Frequency response 50Hz to 16kHz, ±3dB
Nominal impedance
Sensitivity 87dB SPL (2.83V, 1m)
Maximum output Over 100dB for a pair at 2m
Bass/midrange 200mm Diaphnatone polypropylene
Tweeter Son Audax HD13D34H
Recommended amplifier power 50 to 200 watts unclipped programme

2018-02-22_18h01_17The BBC LS5/9

The LS5/9 is a high quality studio monitor that was designed by BBC Research and Development and featured a brand new 8 inch bass/midrange drive unit that was developed entirely in-house and constructed using the best materials available at the time.

Designed for use by the BBC in smaller studios and control rooms, the LS5/9 is a close sonic match for the larger LS5/8. Equally at home in a domestic setting, the open and expansive mid-range reveals previously unheard details from even the most familiar recordings.

With Derek Hughes at the drawing board, the original BBC design has been recrerated. A new bass/midrange driver has been developed in conjunction with Volt Loudspeakers which uses a substantial die-cast aluminium frame and a massive motor assembly, allied to a diaphragm formed from a selected grade of polypropylene and matched to a high quality rubber surround. Each bass driver is hand-assembled and tested by Volt.

The tweeter is a selected version of the Audax 34mm soft dome, which is protected by a strong metal grille. A sophisticated crossover network blends the units together and equalises the overall response for optimum performance in free space.ls59_rear

The cabinet uses classic BBC “thinwall” construction, and is manufactured in the UK from high quality 9mm birch plywood. Hand-matched veneers are applied and finished to a very high standard indeed. All joints in the cabinet are reinforced with hardwood batons to ensure long life and total air sealing. The panels are mass-loaded to ensure that resonances are moved away from the critical mid-range region, and a layer of Rockwool held in place by fabric provides air damping. The grille – machined from a single piece of 9mm birch plywood – is held in place by concealed rare-earth magnets.