T+A A 3000 HV

PVP: 12.920 €

Etapa Estereo T+A A 3000 HV


Ver mas productos T+A


Output stage

All measurements at 120 / 240 V mains voltage

RMS output per channel stereo mode
into 8 Ohms
into 4 Ohms
300 Watts
500 Watts
Peak output per channel stereo mode
into 8 Ohms
into 4 Ohms
380 Watts
700 Watts
RMS output Mono mode
into 8 Ohms
into 4 Ohms
380 Watts
650 Watts
Peak output Mono mode
into 8 Ohms
into 4 Ohms
430 Watts
800 Watts
Power bandwith
1 Hz – 150 kHz
Frequency response + 0 / – 3 dB
0,5 Hz – 180 kHz
Slew rate
60 V/μs
Damping factor
> 65
Signal / noise ratio
> 115 dB
Total harmonic distortion
< 0,03 %
Reservoir capacity
120000 μF

Mains / Accessories / Dimensions

110-120 V/60 Hz oder 220-240 V/50 Hz / 1500 W
< 0,5 W
Trigger input +5 … 20V for external switching-on
Dimensions (H x W x D)
17 x 46 x 46 cm
38 kg
Case: silver laquer 47 or titanium laquer 64,
heat sink: black 42
Technical modifi cations reserved

2017-06-12_12h25_18The A 3000 HV is the ideal power amplifier and complement to the P 3000 HV pre-amplifier. It is designed as a stereo power amplifier, but can also be configured to work in mono mode, in which guise it is capable of delivering twice the current and in which it doubles the pure Class-A mode. Thanks to HV technology, this powerhouse offers superb sound characteristics as well as incredible power and performance: a standard which is unsurpassed even by much more expensive amplifiers. The principle of splitting a High-End system into separate pre-amplifier and power amplifier gave our development team the opportunity to implement the finest possible circuit designs and technologies without having to take into account space considerations and case restrictions. This applies both to the electronic components and the mechanical design of the case, since – if the aim is to attain the best possible sound – a preamplifier’s requirements are fundamentally different from those of an power amplifier: preamplifiers process relatively small signals, and the crucial aspect of their design is the avoidance of induced and other interference; power amplifier, on the other hand, have to cope with relatively large signals, and the stability of the power supply, its current delivery capacity and performance independent of load are much more important.

AUDIOELITE distribuidor oficial T+A. Atendemos pedidos para toda España. Andalucía, Asturias, Aragón, Baleares, Castilla Leon, Castilla La Mancha, Cataluña, Cantabria, Comunidad de Madrid, Comunidad Valenciana, Extremadura, Galicia,  Murcia, Rioja y Pais Vasco.

AUDIOELITE compra equipos de ocasión de sus clientes y vende también equipos ex-demo.