T+A PA 2000 R

PVP: 6.100 €

Amplificador Integrado T+A PA 2000 R


Ver mas productos T+A


Pre-amplifier stage

Frequency response + 0 / − 3 dB
0,5 Hz – 300 kHz
Signal:noise ratio, unweighted/A-weighted
105/109 dB
Total harmonic distortion/Intermodulation
< 0,001 % / < 0,001 %
Channel separation
> 90 dB
Switchable, variable to suit loudspeaker efficiency
Tone controls
Switchable, channel-separate
−6 … +8 dB
−6 … +8 dB
Nominal input sensitivity
High level (RCA)
3 × 250 mV … 4 Veff/20 kOhms
Balanced (XLR)
3 × 500 mV … 8 Veff/5 kOhms
Phono-MM (optional*)
*Phono module replaces one high-level input
1 – 5 mV,
16 Capacitances
Phono-MC (optional*)
*Phono module replaces one high-level input
60 – 1000 µV,
16 Impedances


50 Ohms
Nom 1 Veff, Max 9,5 Veff, 75 Ohms

Output stage

Nominal output per channel
into 8 Ohms 100 Watts
into 4 Ohms 200 Watts
into 2 Ohms 300 Watts
Frequency response + 0/– 3 dB
1 Hz – 150 kHz
Slew rate
60 V/µs
Damping factor
> 65
Total harmonic distortion
< 0,02 %
Reservoir capacity
60000 µF

Mains / Accessories / Dimensions

Control interface
Remote control
FM 2000
Mains connection
100 – 120 V oder 200 – 240 V, 50 – 60 Hz
Max. 1000 Watts
< 0,5 W
Additional features
Trigger input +5V … 20V via adapter plug for remote power-on
Input 3 (symmetrical) or 5 (asymmetrical) can be configured as Surround Pass Through
Dimensions (H x W x D)
8,2 × 46 × 40 cm
10,5 kg
Silver anodised aluminium (43), black anodised aluminium (42), brushed

Technical modifications reserved


Building neat, compact integrated amplifiers offering high output power and superb sound quality is an art at which T+A has no peer. As proof of this claim we present the PA 2000 R integrated amplifier. It is incredibly dynamic, powerful and incisive. There are two reasons behind these characteristics: the extremely linear output stages with very low negative feedback, which are a completely new development, and the new form of mains power supply employed. We designed the latter specifically for audio devices, to ensure that they are ultra-stable under load, with no danger of collapse even when handling extremely high peak levels. The result is that the PA 2000 R can deliver a continuous power of more than 200 Watts per channel into 4 Ohms loudspeakers, enabling it to drive impedance-critical speakers whilst maintaining effortless control. Gas-tight gold-contact relays are employed to switch loudspeakers, inputs and internal signal circuits with total precision and zero losses. Separate tone controls are present for each channel, and they and the Loudness function can be by-passed completely. An optional audiophile phono pre-amplifier module for MM or MC can simply be plugged in. For operation in a surround system the amplifier can be set to Surround Pass Through mode, selected by a trigger signal.

AUDIOELITE distribuidor oficial T+A. Atendemos pedidos para toda España. Andalucía, Asturias, Aragón, Baleares, Castilla Leon, Castilla La Mancha, Cataluña, Cantabria, Comunidad de Madrid, Comunidad Valenciana, Extremadura, Galicia,  Murcia, Rioja y Pais Vasco.

AUDIOELITE compra equipos de ocasión de sus clientes y vende también equipos ex-demo