T+A PA 2500 R

PVP: 7.750 €

Amplificador Integrado T+A PA 2500 R

2017-06-12_12h53_59

Ver mas productos T+A

Specifications

Pre-amplifier stage

Frequency response + 0 / − 3 dB
0,5 Hz – 300 kHz
Signal / noise ratio, unweighted / A-weighted
105 / 109 dB
Total harmonic distortion/Intermodulation
< 0,001 % / < 0,001 %
Channel separation
> 90 dB
Loudness
Switchable, variable to suit loudspeaker efficiency
Tone controls
Bass
Treble
Switchable, channel-separate
−6 … +8 dB
−6 … +8 dB
Nominal input sensitivity
High level (RCA)
4 × 250 mV … 4 Veff/20 kOhms
Balanced (XLR)
3 × 500 mV … 8 Veff/5 kOhms
Phono-MM (optional*)
*Phono module replaces one high-level input
1 – 5 mV,
16 Capacitances
Phono-MC (optional*)
*Phono module replaces one high-level input
60 – 1000 µV,
16 Impedances

Outputs

Headphone
50 Ohms
PRE out RCA
Nom 1 Veff, Max 9,5 Veff, 75 Ohms
PRE out XLR
Nom 1,45 Veff, Max 19,6 Veff, 75 Ohms

Output stage

Nominal output per channel
into 8 Ohms 140 Watts
into 4 Ohms 280 Watts
into 2 Ohms 560 Watts
Frequency response + 0/– 3 dB
1 Hz – 150 kHz
Slew rate
60 V/µs
Damping factor
> 65
Total harmonic distortion
< 0,02 %
Reservoir capacity
120000 µF

Mains / Accessories / Dimensions

Control interface
R2-Link
Remote control
FM 2000
Mains connection
100 – 120 V or 200 – 240 V, 50 – 60 Hz
Max. 2000 Watt
Standby
< 0,5 W
Additional features
Trigger input +5V … 20V via adapter plug for remote power-on
Input 3 (symmetrical) or 5 (asymmetrical) can be configured as Surround Pass Through
Dimensions (H x W x D)
16,5 × 46 × 40,5 cm
Weight
14,5 kg
Finishes
Silver anodised aluminium (43), black anodised aluminium (42), brushed

Technical modifications reserved

2017-06-12_12h54_12

Twice as tall, higher output power and even more connection facilities – the PA 2500 R exceeds the specification of the PA 2000 R in many areas, but its character in terms of sound quality is in no way inferior to its smaller sibling. This by no means goes without saying, because very powerful amplifiers often forfeit the finer points of dynamics and detail tracery. Our PA 2500 R integrated amplifier circumvents this danger: its basic circuit is the same as that of the PA 2000 R, and even the circuit board layouts are identical. However, its heat-sinks are twice the size, and the case accommodates two of our new high-performance mains power supply units, with the result that it can deliver more than 280 Watts of continuous power per channel into 4 Ohms loudspeakers. The amplifier is therefore effortlessly capable of controlling speakers which are extremely critical in terms of phase and impedance. The PA 2500 is even more powerful than the smaller machine, but retains exactly the same dynamism and cultured sound.

AUDIOELITE distribuidor oficial T+A. Atendemos pedidos para toda España. Andalucía, Asturias, Aragón, Baleares, Castilla Leon, Castilla La Mancha, Cataluña, Cantabria, Comunidad de Madrid, Comunidad Valenciana, Extremadura, Galicia,  Murcia, Rioja y Pais Vasco.

AUDIOELITE compra equipos de ocasión de sus clientes y vende también equipos ex-demo